Benefits of High pressure PTFE Wire Feeding Tube

High Pressure PTFE Wire Feeding Tube 2inch Water Air Oil PTFE Pipe hose Tube sold Well  API oil Tubing –casing oilfield service From Tianjin Tiangang High pressure PTFE wire feeding tubes have gained significant popularity in various industries due to their numerous benefits. These tubes, measuring 2 inches in Diameter, are designed to handle water, air, and oil, making them versatile and suitable for a wide range of applications. In this article, we will explore the benefits of using high pressure PTFE wire feeding tubes and why they have been selling so well.

Labels a							Calculated Mass c
			Nominal Linear Mass T& C b,c	Wall Thick- ness				em, Mass Gain or Loss Due to End Finishing d
		Outside Diameter			Inside Diameter	Drift Diameter	Plain- end	kg
								round Thread		Buttress Thread
							wpe
		D	kg/m	t	D	mm	kg/m	Short	Long	RC	SCC
		mm		mm	mm
1	2	3	4	5	6	7	8	9	10	11	12
13 3/8	48	339.72	71.43	8.38	322.96	318.99	68.48	15.04	—	— 17.91	—
13 3/8	54.5	339.72	81.1	9.65	320.42	316.45	78.55	13.88	—	16.44	—
13 3/8	61	339.72	90.78	10.92	317.88	313.91	88.55	12.74	—	14.97	—
13 3/8	68	339.72	101.19	12.19	315.34	311.37	98.46	11.61	—	14.97	—
13 3/8	68	339.72	101.19	12.19	315.34	311.37	98.46	11.67 f	—	14.33	—
13 3/8	72	339.72	107.15	13.06	313.6	311.15 e	105.21	10.98	—	13.98	—
13 3/8	72	339.72	107.15	13.06	313.6	311.15 e 309.63 309.63	105.21	10.91 f	—	14.33	—
13 3/8	72	339.72	107.15	13.06	313.6		105.21	10.98	—	13.98	—
13 3/8	72	339.72	107.15	13.06	313.6		105.21	10.91 e	—		—
16	65	406.4	96.73	9.53	387.4	382.57	96.73	18.59	—	— 20.13	—
16	75	406.4	111.61	11.13	384.1	379.37	108.49	16.66	—	18.11	—
16	84	406.4	125.01	12.57	381.3	376.48	122.09	14.92	—	—	—
16	109	406.4	162.21	16.66	373.1	368.3	160.13	—	—		—
18 5/8	87.5	473.08	130.21	11.05	450.98	446.22	125.91	33.6	—	39.25	—
20	94	508	139.89	11.13	485.7	480.97	136.38	20.5	27.11	24.78	—
20	94	508	139.89	11.13	485.7	480.97	136.38	20.61	27.26 g 24.27 17.84	24.78	—
20	106.5	508	158.49	12.7	482.6	477.82	155.13	18.22		22	—
20	133	508	197.93	16.13	475.7	470.97	195.66	13.03		16.02	—
NOTE See also Figures D.1, D.2, and D.3.
a Labels are for information and assistance in ordering.
b Nominal linear masses, threaded and coupled (Column 4) are shown for information only.
c The densities of martensitic chromium steels ( L80 Types 9Cr and 13Cr) are less than those of carbon steels; The masses shown are therefore not accurate for martensitic chromium steels; A mass correction factor of 0.989 shall be used.
d Mass gain or loss due to end finishing; See 8.5.
e Drift diameter for most common bit size; This drift diameter shall be specified in the purchase agreement and marked on the pipe; See 8.10 for drift requirements.
f Based on 758 mPa minimum yield strength or greater.
g Based on 379 mPa minimum yield strength.

One of the key advantages of high pressure PTFE wire feeding tubes is their exceptional resistance to chemicals. PTFE, or polytetrafluoroethylene, is a synthetic fluoropolymer that exhibits remarkable resistance to a wide range of chemicals, including acids, bases, solvents, and corrosive substances. This makes these tubes ideal for use in industries where exposure to harsh chemicals is common, such as chemical processing plants and laboratories.

Another benefit of high pressure PTFE wire feeding tubes is their excellent Temperature resistance. PTFE can withstand extreme temperatures ranging from -200°C to +260°C (-328°F to +500°F) without losing its physical properties. This makes these tubes suitable for applications that involve high or low temperatures, such as in the automotive industry, where they can be used for conveying hot oil or coolant. Furthermore, high pressure PTFE wire feeding tubes have a low coefficient of friction, which means that they offer excellent non-stick